FITTING 6I0565 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 207-1600(1) Rubber Lubricant 1
207-1601 Rubber Lubricant 1
(1) For Use In EAMEStart By:
Remove the water temperature regulator.
Illustration 1 g06049955
Remove bolts (1) and panel (2).
Illustration 2 g06049956
Loosen clamp (3) and disconnect tube (4).
Illustration 3 g06049959
Loosen clamp (5) and disconnect hose (6).
Illustration 4 g06049962
Remove bolt (7) and clip (8).
Illustration 5 g06049967
Loosen clamp (9) and disconnect hose (10).
Loosen clamp (11) and remove tube (12).
Illustration 6 g06049971
Disconnect hose assemblies (13).
Remove bolts (15) and bracket assembly (14).
Illustration 7 g06049974
Loosen clamp (16) and disconnect hose (17).
Illustration 8 g06049979
Loosen clamp (18). Remove bolts (21), hose (19), and elbow (20).
Illustration 9 g06050026
Remove bolts (23) and water pump (22).
Illustration 10 g06050030
Remove O-ring seal (24) from water pump (22).
Illustration 11 g06050033
Remove seal (27).
Remove bolts (25) and inlet cover (26).
Illustration 12 g06050037
Remove O-ring seal (28) from inlet cover (27).Installation Procedure
Install water pump (22) in the reverse order of removal.
Apply Tooling (A) to all O-ring seals and seals.