FITTING 7R7777 - Caterpillar

Normal Mode
The AccuGrade system automatically operates in normal mode when you start the display. Turn the key start switch to ON and press the power key.As a default, the following soft keys are available when the display is in normal mode.
Select blade tip focus ("Blade: Left or Blade: Right")
Set machine direction ("Direction: Forward")
Set the horizontal offsets ("H. Offset.")
Set the vertical offsets ("V. Offset.")
Turn map recording on or off (if enabled)
Set the GPS accuracyYou can also use the "Setup Menu – Configuration" dialog to perform the following when you are in Normal mode.
Select Design
Vertical Offset
Horizontal Offset
GPS Accuracy
Edit the Blade Wear value
Vertical Setup
Set the Light Bar Scales and On-Grade Tolerance
Display and Lightbar Brightness
Calibrate Sensors
Restore the Display Settings or the Machine Settings
View basic Diagnostic informationRefer to the Operation and Maintenance Manual, SEBU8505 for more details on Normal mode operation.Service Mode
Note: If you lack experience with the AccuGrade system, use extreme care when the display is in service mode. This ensures that you do not accidentally change the settings of the AccuGrade system.Service mode allows the user access to all of the available options that the AccuGrade system offers.Use service mode in order to change the settings that affect the operation of the AccuGrade system.In order to turn on service mode, turn off the display if the display is ON. Press and hold down the "OK" key as you press the power key. Hold down the "OK" key until the display shows the start-up screen.In order to turn off service mode, turn off the display.Use the "Setup Menu - Configuration" dialog in order to perform the following when you are in service mode:
Select Design
Vertical Offset
Horizontal Offset
GPS Accuracy
Blade Wear
Lightbar Scales
Display and Lightbar Brightness
Calibrate Sensors
Map recording
Avoidance Zones
Text items
Display Direction
Plan View Rotation
Beeper Configuration
Save Settings
Restore Settings
GPS Receiver Configuration
DiagnosticsUse the "Setup Menu - Installation" dialog to perform the following when you are in Service Mode:
Machine Settings
Set Units
Set Machine Dimensions
Set the Radio Network
Light Bar Connections
Valve Calibration
Wireless Communication Support
Production Recording
Upgrade Firmware
Operator Configuration
Software Option
Enter Software Support Option
Guidance Hours
Select LanguageTurn off the display in order to exit the service mode. This ensures that inexperienced users will not inadvertently change the settings of the AccuGrade system.