FIXTURE- 5P2050 - Caterpillar

1. Disconnect horn wire (1) from wiring harness. 2. Remove two bolts (2) and horn assembly (3). 3. Remove screws and cover (4) from console. 4. Remove insulator (9) and ring (8) from steering shaft.5. Remove four brushes (5) and springs (6) from assembly. 6. Disconnect plug (10) from wiring harness.7. Remove retainer (7) from the steering control pump housing.Install Electric Horn
1. Put the horn retainer (1) in position on the steering control pump housing. 2. Connect plug (2) from retainer to the wiring harness. 3. Install four springs and brushes (5) in retainer. Install ring (3) and insulator (6).4. Install cover (4) on console. 5. Put electric horn assembly (7) in position and install two bolts. 6. Connect horn wire (8) to the wiring harness.end by:a) install steering wheel