FIXTURE G. 8S2271 - Caterpillar

4P-8488 Lines Group ... Water (REQUIRED Parts Replacement)
105-4330 Lines Group ... Oil Cooler (RECOMMENDED Parts Replacement)
994 ... 9YF28-Up 7E-6733 Regulator Group (REQUIRED Parts Replacement)
Compressor Group ... Refrigerant (Replace as REQUIRED)
4P-9307 Condenser Group (Replace as REQUIRED)
8X-0038 Lines Group ... Air Conditioner (Replace as REQUIRED)
4P-7073 Fan Group ... Blower
REQUIRED update for machines:994 ... 9FY1-38 Replace as REQUIRED for machines:994 ... 9FY39-Up 4P-9999 Cooler Group ... Hydraulic Oil (Replace as REQUIRED)
8X-0012 Aid Group ... Ether Starting (Rear) (REQUIRED Parts Replacement)
8X-3536 Aid Group ... Ether Starting (Platform) (Replace as REQUIRED)
4P-5713 Radiator Group (RECOMMENDED Parts Replacement)
9Y-9211 Radiator Group (Replace As REQUIRED)
Inspect for:* Coolant leaks* Plugged cores ... and* Cracked side channelsReplace as REQUIRED 1012725 Guard Group ... Radiator (RECOMMENDED Parts Replacement)
8X0079 Lines Group ... Torque Convertor Cooler (REQUIRED Parts Replacement)
8X-1718 Lines Group ... Oil Cooler (Brake) (REQUIRED Parts Replacement)
Engine Wiring Group
The engine electric wiring harness, sensors, senders, switches and attachment components are part of the Engine Wiring Group.The parts that follow (within a selected Product Identification Number range) are REQUIRED parts replacement.Select the parts chart that reflects the correct Product Identification Number range:8X-0051 Wiring Group ... Engine
994 ... 9YF1 - 27 7I-5887 Wiring Group ... Engine
994 ... 9YF28 - Up 8X-1728 Lines Group ... Air Tank (Rear) (Replace As REQUIRED)
7I-5839 Shut Off Group (Replace As REQUIRED)
6Y-5845 Coupling Group (Replace As REQUIRED)
105-3156 Control Group ... Governor (REQUIRED Update)
994 ... 9YF1 - 55 Machines 9YF1 - 55 were equipped with mechanically controlled engine governors.This Remanufactured Engine is equipped ONLY with the pneumatic controlled governor.The machines with mechanically controlled engine governors MUST be updated to accommodate this engine. 105-3149 Lines Group ... Governor (REQUIRED Parts Replacement)
105-3159 Lines Group ... Air Tank (REQUIRED Parts Replacement)
105-3157 Wiring Group ... Cab (REQUIRED Parts Replacement)
8X-1739 Control Group ... Service (REQUIRED Parts Replacement)
8X-1756 Platform Group (REQUIRED Parts Replacement)
Preparing the Engine For Shipment to the Factory
If the engine or the block is to be used for a core credit, refer to:* SELD0164 ... Core Acceptance Criteria ... andFollow the recommended procedures to prepare the engine for shipment to the factory and to ensure maximum core credit. The engine coolant MUST be drained from the engine.Remove the quick drain hoses and fittings from the:* Engine cylinder block* Engine oil cooler(s) ... and* Engine water pump(s) The drain points may need to be cleared of any restrictions (scale/sludge) to ensure complete purging of the coolant.