FLANGE-HITCH 1100910 - Caterpillar

Illustration 7 g00716803
Typical example
If the counterweight is equipped with lifting brackets, fasten suitable lifting links to the brackets. Fasten a suitable lifting device to the counterweight, as shown.
Illustration 8 g00716807
Remove bolts (9) and the spacers that secure the counterweight to the main frame of the machine. Remove the counterweight. The weight range of the counterweight can be from 3868 kg (8525 lb) to approximately 7165 kg (15800 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7576 Link Bracket 2
B 1U-7630 Socket Assembly 1
C 4C-5592 Anti-Seize Compound
Personal injury or death can occur from a counterweight falling during removal or installation.Do not allow personnel under or around the counterweight during removal or installation.Make sure that the lifting device is in good condition and is capable of handling the weight of the counterweight.
Illustration 9 g01041658
Make sure that the threaded holes in the top of the counterweight are clean prior to installation of Tooling (A). Install Tooling (A) and a suitable lifting device to the counterweight, as shown. Note: Make sure that Tooling (A) is completely threaded into the threaded holes in the counterweight.
Illustration 10 g00716803
Typical example
If the counterweight is equipped with lifting brackets, fasten the suitable lifting links to the brackets. The weight range of the counterweight can be from 3868 kg (8525 lb) to approximately 7165 kg (15800 lb).
Illustration 11 g00716807
Position the counterweight on the main frame of the machine. Apply Tooling (C) on the threads of mounting bolts (9). Also apply Tooling (C) between the bolt heads and the spacers.
Install bolts (9) and the spacers that secure the counterweight to the main frame of the machine.
Remove Tooling (A) from the threaded holes in the counterweight. If the counterweight is equipped with lifting brackets, remove the lifting links from the lifting brackets.
Illustration 12 g00716782
Use Tooling (B) in order to install caps (8) to the top of the counterweight. Tighten caps (8) to a torque of 12 4 N m (9 3 lb ft).
Illustration 13 g00716772
Install springs (6).
Install hood support rod (7). Install the washer and cotter pin (5).
Illustration 14 g00716756
Install mounting bracket (4). Install the washers and bolts (3).
Illustration 15 g00716751
Install the washers and bolts (2).
Illustration 16 g00716735
Install the washer and bolt (1). End By:
Install the hood assembly. Refer to Disassembly and Assembly, "Hood - Remove and Install".