FLANGE 1523531 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B - Loctite Gasket Sealant No. 2 -
Illustration 1 g01420110
Whenever fuel level sender (9) is removed from fuel tank (7), a new gasket (10) is required. Apply a 3 mm (0.1181 inch) bead of Tooling (B) to both sides of gasket (10) before assembling to fuel tank (7).
Illustration 2 g01346298
Position fuel tank (7) under the machine. Position guard (8) onto Tooling (A). The weight of guard (8) is approximately 73 kg (160 lb). Use two people to install fuel tank (7) onto guard (8). The weight of fuel tank (7) is approximately 34 kg (75 lb).
Illustration 3 g01346274
Install straps (10). Install bolts (11).
Illustration 4 g01346273
Use the Tooling (A) to raise fuel tank (7) and guard (8). Install bolt (9). Repeat for the other side.
Illustration 5 g01346057
Install bolts (5) and (6).
Illustration 6 g01346056
Remove Tooling (A).
Illustration 7 g01346045
Install plate (4) and bolts (3).
Illustration 8 g01346047
Connect hoses (1) and harness assembly (2).