FLANGE-ONE PIECE 1P5709 - Caterpillar

Pack bearing (20) with Tooling (F).Use a suitable press to install bearing (20) to shaft assembly (14).
Illustration 2 g02623158
Install spacer (19).
Illustration 3 g02623156
Install bearing cup (18).
Illustration 4 g02620110
Install bearing cup (16) and lip seal (17).
Illustration 5 g02620142
Heat bearing (15) and position into the housing. Install shaft (14) through bearing (15).
Illustration 6 g02620143
Illustration 7 g02620144
Apply Tooling (D) to nut (13). Install nut (13). Use Tooling (D) to tighten nut (13). Tighten nut (13) to a torque of 800 50 N m (590 37 lb ft).Note: Do not reuse the existing nut, install a new nut (13).
Illustration 8 g02620145
Peen nut (13).
Illustration 9 g02620105
Install spacer (12) and O-ring seal (11).
Illustration 10 g02620104
Install ring gear (10).
Illustration 11 g02620103
Install inner gear set (9).
Illustration 12 g02620102
Possible injury can result when removing the retaining ring and spring.Spring force will be released when the retaining ring is removed.Be prepared to hold the cylinder assembly as the retaining ring is removed.
Use Tooling (B) to install retaining ring (6). Install gear (5) and retaining ring (6) to planetary gear set (4).
Use Tooling (A) to install three retaining rings (7). Install three gears (8) and three retaining rings (7) to planetary gear set (4).
Illustration 13 g02620100
Install planetary gear set (4) and sun gear (3).
Illustration 14 g02620099
Install O-ring seal (2) to adapter (1).
Illustration 15 g02620098
Install adapter (1) and the bolts.End By:
Install final drive planetary (auger conveyor). Refer to Disassembly and Assembly, "Final Drive Planetary (Auger Conveyor) - Remove and Install".