parts catalog

FLANGE ADAPTER 25014 - Caterpillar

25014 FLANGE ADAPTER Caterpillar parts PR-275 FLANGE
Alternative (cross code) number:
Caterpillar 25014 FLANGE ADAPTER

Buy FLANGE ADAPTER 25014 Caterpillar genuine, new aftermarket tractor parts with delivery

You can buy parts: .


08 Dec 2020
g-oo-d 25014 Sкіmmеr Ноок аnd Аdjustеr fоr Меtаl Frаmе Рооls Rерlасеmеnt Раrt

01 Dec 2020
TDPRO (2.50-14) 1.4x14 inch Wheel with 12mm Bearing Axle 60/100-14 Tires Rim & Disc Roto assembly For Dirt Pit Bike
This is the 14" front dirt bike wheel assembly commonly used on many 50cc, 70cc, & 90cc dirt bikes. || The assembly comes complete with the front rim, 2.50-14 knobby tire, inner tube, wheel bearings and brake disc rotor. || Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order. || Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake disc rotor

19 Jan 2021
POOLPURE Filter Replaces Hayward X-Stream CC1500, CCX1500-RE, Pleatco PXST150, Unicel C-8316, Filbur FC-1286, Aladdin 25014, 817-0150N, 817-0150P, Waterway Clearwater II/Pro Clean 150, 1 Pack
【NSF/ANSI 50 Certified】 Poolpure Pool and Spa filter is tested and certified by IAPMO against NSF/ANSI 50. Poolpure filter delivers safe and clear purified water to inspire the highest sense of happiness. Enjoy your unique SPA time. || 【Compatible Models】 Length: 23 1/4"; Outside Diameter: 8 15/16"; Top: Open Hole 4"; Bottom: Open Hole 4". PLFPXST150 Pool Filter compatible Pleatco PXST150-M, Unicel C-8316RA, SD-00371, SD-00748, SD-00737, MX-1500RE, Harward CC-1500-E, CC1500RE. NOTE: All trademark remain the property of their respective holder(s) and are used for compatibility information only. POOLPURE is an independent brand. || 【100% Money-Back Guarantee】Six-Months Return Policy Guaranteed! Product Life Time Warranty on Every Filter Confirmed With Defects in Material and Workmanship Within Each Filter's 12 Months Service Life. We promise a risk-free shopping experience backed up with our reliable Quality Control, Customer Service and Technical Support Team which is located to Los Angeles. || 【Powerful Filtration Performance】 Innovated "Dirt-Locking" technology make the fabric traps much more contaminants than regular fabric. This filter efficiently removes hair, leaves, dust, sediment, sand, etc. Enjoy clean leisure time in your spa and hot tub. || 【Long Service Life】 Unique Trilobal Filtration Fabric Structure make it easier to capture large volume of contiminants. It is also easy to wash/clean to recondition the filter. This filter lasts for 1-2 years when proper maintenance is performed. We are committed to providing the best quality at good price.
Number on catalog scheme: 10
  For full view, you need register

Compatible equipment models: 25014:

COLD PLANER  PR-275   Caterpillar


Illustration 1 shows the relationship between the reference surface, in this case an existing curb line, and the benchmark elevation. Because the blade has been placed at the design elevation for benching, the reference elevation will be zero. In operation, the system will generate cut/fill values that will move the blade up and down to maintain a constant distance between the Sonic Tracer and the reference surface.3D Design Surfaces And Design Files
A 3D design surface is defined by a digital design surface file, or design. A design must contain a 3D design surface and can also contain background linework. The design surface contains vertical guidance information for a specific area. The design surface can be an irregular surface or a plane.Design surfaces are created in the office and saved onto a data card in the form of a design file. From the data card, the design file can be loaded directly to the Display. A data card can contain more than one design file. However, the AccuGrade System will only load one design at a time for display and guidance.Note: Once a data card is loaded into the Display, it is recommended that you do not remove the data card until the Display is turned off.Avoidance zones
A beeper alerts you as the machine approaches an avoidance zone.Avoidance zones are designated areas that you must keep away from. Avoidance zones can be sitewide, or avoidance zones can be specific to a particular design surface. AccuGrade System provides avoidance zone proximity detection at the blade tips. If the distance from the ripper to the blade has been configured, avoidance zone proximity detection is also given relative to the rippers, and is based on the width of the blade.Site avoidance zones
When the system is turned on, Site avoidance zones are automatically loaded from the data card. Then, the Site avoidance zones are displayed in the Plan View. Site avoidance zone proximity detection is provided until the Display is turned off. Note: If the Site avoidance zone cannot be loaded, the Display will be turned off. The data card with the avoidance zone must be removed from the Display in order to continue operation. Contact your site manager immediately.Design avoidance zones
Design avoidance zones are specific to a design surface. Design avoidance zones load from the data card as the design is loaded.Design avoidance zones are shown in the Plan View of the Display. Design avoidance zone proximity detection is provided while the design surface remains loaded.Note: If the Design avoidance zone cannot be loaded, the selected design will not be loaded. Select an alternative design surface in order to continue. Contact your site manager immediately.No avoidance zone guidance
While any of the following warning messages are displayed, avoidance zone guidance is not given:
"V. Low Accuracy"
"No GPS Data (Left)"
"No GPS Data (Right)"
"Old Position"
"No GPS Receiver Data"
"Invalid GPS" DataIf any of the above messages appear, the following warnings are activated:
the "NO AVOID " indicator appears on the guidance screens
the "Avoid. Dist." text item, if configured,

Caterpillar parts catalog:

Caterpillar parts catalog

Parts flange Caterpillar catalog:

1833795 FLANGE
374D L, 374F L, 5080
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080
0875034 FLANGE
375, 375 L, 5080
375, 375 L, 5080
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.