FLANGE AS 2920732 - Caterpillar

g01371640
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Hot Surface (17)
Illustration 5 g01627957
This safety message is located under the engine hood.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Pressurized System (18)This safety message is located next to the cooling system filler cap.
g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.Hot Surface (19)
Illustration 6 g01372256
This safety message is located on the engine hood.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Crushing Hazard (20)This safety message is located on both sides of the stick.
g01385579
A crushing hazard exists when the stick and boom are in motion and when the machine is being used in object handling applications. Failure to stay clear of the stick and boom when the machine is in operation can result in personal injury or death. Stay clear of the stick and boom when the machine is in operation.
High Pressure Cylinder (21)This safety message is positioned on the track adjusters.
g01076729
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
See the Operation and Maintenance Manual , "Track Adjustment - Adjust" information for your product. Crushing Hazard (Counterweight) (22)
Illustration 7 g01435553
This safety message is located on the right side of the machine inside the access door.
Crushing Hazard! When the counterweight is in the fully extended position for servicing the machine, secure the extended counterweight with the counterweight lock lever.Use the counterweight lock lever to avoid possible personnel injury or death from crushing.
Refer to Operation and Maintenance Manual, "Counterweight Removal and Installation" for further information.