FLANGE AS 4922932 - Caterpillar

Removal Procedure
Start By:
Remove the rotary actuator (carburetor).
Illustration 1 g02735839
Remove bolts (1) and remove tube assembly (3) .Note: If necessary, remove throttle (2) .
Illustration 2 g02645660
Remove hose assembly (4) .
Illustration 3 g02645666
Remove cover (5) and remove the air filter element.
Illustration 4 g02645699
Illustration 5 g02645714
Remove bolts (6) and the guide. Remove clips (8) and remove hose (9) .
Remove bolts (7) and remove adapter (10) and carburetor (11) .
Illustration 6 g00784077
Remove bolts (12) . Separate carburetor (11) from adapter (10) . Check the condition of the gasket between the carburetor and the adapter. If the gasket is worn or damaged, use a new part for replacement.
Illustration 7 g00784084
Remove indicator (13) from adapter (10) .Installation Procedure
Install carburetor (11) in the reverse order of removal.
Tighten bolts (3) to a torque of 60 12 N m (44 9 lb ft).
Adjust carburetor (11) after installation. Refer to Test and Adjusting, SENR6538, "Carburetor - Adjust".