FLANGE 4N2198 - Caterpillar

Caterpillar: Confidential Yellow
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS0984" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
This Revised Service Letter replaces the September 2, 1996 Service Letter. Changes have been made to the Action Required.
Termination Date
September 30, 1997Problem
Aluminum pistons, which do not meet reuse guidelines, may need to be replaced on certain 3406E Truck Engines rated at 410 horsepower and below.
Affected Product
Model & Identification Number
3406E (5EK1-80006)
Parts Needed
1 - 4N1151 Gasket1 - 5P5846 Seal-O-Ring1 - 5P8068 Seal-O Ring6 - 0R8333 Cylinder Pack6 - 9Y7735 Bearing1 - 619458 Seal-O-Ring6 - 1003851 Tube Assembly6 - 1118606 Bolt1 - 1358810 Gasket KitAction Required
Remove six cylinder packs and six oil spray jets (single spray jet).
Install six (0R8333) Cylinder Packs, six 1003851 Oil Spray Jets (double spray jets) and related gasket and seals.
Refer to SIMS and if Service Letter PS8700 or PS8748 has been completed, flash back to the original software.
Service Claim Allowances
Labor Hours By Cab Type If the cylinder head is already removed, use the codes below in place of the 1239-010 labor code above. The use of 1239-010 is not authorized when the cylinder head has been removed for a separate repair.
Cab TypesSC = Ford LN, L, LS, LA, Short ConventionalMC = Medium Hood ConventionalCV = Long Hood ConventionalCO = Cab Over
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.