4W5096 FLANGE AS Caterpillar parts
589
Rating:
Alternative (cross code) number:
CA4W5096
4W-5096
4W5096
CA4W5096
4W-5096
4W5096
Weight: 5 pounds 2 kg.
PIPELAYER,
Compatible equipment models: 4W5096:
Number on catalog scheme:
5
For full view, you need register
Information:
Remove The Fan
Illustration 1 g00871386
(1) Cable (2) Fan (3) Guard (4) Screws (5) Filter (6) Cover
Disconnect the power to the monitor.
Remove cover (6) and remove filter (5) .
Remove guard (3) by removing screws (4) that hold guard (3) in place.
Remove the back cover of the monitor by removing the 8 screws that hold the back cover in place. Refer to Testing And Adjusting, "Cover - Remove" for details on removing the back cover.
Remove the two wire ties that secure the power wires around fan (2) .
Illustration 2 g00871408
CPU Board (7) Connector
Follow cable (1) and disconnect the connector from CPU board (7). Disconnect the connector by pulling on the connector. Do not pull on the wires.
Remove fan (2) from the monitor.Install The Fan
Connect the connector of cable (1) to the CPU board (7) .
Position fan (2) so that the power wires are routed above fan (2) .
Secure fan (2) and secure guard (3) with screws (4) .
Replace filter (5) and replace cover (6) .
Secure the power wires to fan (2) by using the wire ties.
Replace the back cover of the monitor by using the 8 screws.
Illustration 1 g00871386
(1) Cable (2) Fan (3) Guard (4) Screws (5) Filter (6) Cover
Disconnect the power to the monitor.
Remove cover (6) and remove filter (5) .
Remove guard (3) by removing screws (4) that hold guard (3) in place.
Remove the back cover of the monitor by removing the 8 screws that hold the back cover in place. Refer to Testing And Adjusting, "Cover - Remove" for details on removing the back cover.
Remove the two wire ties that secure the power wires around fan (2) .
Illustration 2 g00871408
CPU Board (7) Connector
Follow cable (1) and disconnect the connector from CPU board (7). Disconnect the connector by pulling on the connector. Do not pull on the wires.
Remove fan (2) from the monitor.Install The Fan
Connect the connector of cable (1) to the CPU board (7) .
Position fan (2) so that the power wires are routed above fan (2) .
Secure fan (2) and secure guard (3) with screws (4) .
Replace filter (5) and replace cover (6) .
Secure the power wires to fan (2) by using the wire ties.
Replace the back cover of the monitor by using the 8 screws.
Caterpillar parts catalog:
Parts flange Caterpillar catalog:
8G5809
FLANGE
963, 963B, 963C, 973
963, 963B, 963C, 973
120G, 12G, 130G, 14G, 16G, 554, 613, 613B, 613C, 613C II, 621, 621B, 623B, 627B, 797B, 797F, 920, 973, 980K, 980K HLG
6T8388
FLANGE
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, D6H, D6H XL, D6H XR...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, D6H, D6H XL, D6H XR...
2010416
FLANGE
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2, 924G, 924GZ, 930G, D6R, D6R II, D6R III, IT28G, TK711, TK721, TK722, TK732, TK741, TK751,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2, 924G, 924GZ, 930G, D6R, D6R II, D6R III, IT28G, TK711, TK721, TK722, TK732, TK741, TK751,...
955L, 963, 963B, 963C, 973, 973C, 977L, 983B
3W3329
FLANGE
973, 973C
973, 973C
589, D10N, D10R, D10T, D10T2, D8L
578, 583R, 587R, 587T, 589, D10N, D10R, D11N, D11R, D11T, D6H, D6H XL, D6H XR, D7H, D8L, D8N, D9L, D9R, PL87
589, D9L
4W1890
FLANGE-DRAIN
24H, 589, D10N, D10R, D8L, D9L, D9N, D9R
24H, 589, D10N, D10R, D8L, D9L, D9N, D9R
583R, 587R, 587T, 589, D10N, D10R, D7R II, D8L, D9N, D9R
572R, 578, 589, D10N, D11N, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D7H, D7R, D8L, D9R