6V0401 FLANGE-HALF Caterpillar parts
115, 24M, 315B L, 317B LN, 325 LN, 330B L, 345B, 345C, 551, 552, 552 2, 554, 564, 574, 574B, CR20, H110E S, H140CS, H140DS, M316C, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH, MH3037, MP1...
Rating:
Alternative (cross code) number:
CA6V0401
6V-0401
6V0401
CA6V0401
6V-0401
6V0401
Weight: 0.80 pounds 0 kg.
Information:
BOLT HOLE DIAMETER/THREAD
15.0
mm
BOLT PATTERN LENGTH
66.7
mm
BOLT PATTERN WIDTH
31.8
mm
COUNTERBORE DEPTH
13.5
mm
COUNTERBORE DIAMETER
54.8
mm
DASH SIZE
000000000020
PORT COVER PART NUMBER
5P0048
CRUSHER, WHEELED EXCAVATOR,
Compatible equipment models: 6V0401:
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
Disconnect the hose assemblies from the turbocharger inlet and the turbocharger outlet. Refer to the Original Equipment Manufactures (OEM) for the correct procedure.
Disconnect the exhaust tube assembly. Refer to the OEM for the correct procedure.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Illustration 1 g03376116
Slide clip (9) along hose (10). Disconnect the hose from the actuator.
Follow Step 5.a through Step 5.d in order to remove tube assembly (4) from turbocharger (1).
Remove bolt (5).
Remove banjo bolt (2) and remove sealing washers (3) (not shown).
Remove tube assembly (4) from the cylinder block.
Remove O-ring seal (7) (not shown).
Follow Steps 6 through 6.d in order to remove tube assembly (11) from turbocharger (1).
Remove bolts (8).
Remove bolts (12).
Remove tube assembly (11) from turbocharger (1) and the cylinder block.
Remove gasket (6) (not shown) and gasket (13) (not shown).
Illustration 2 g03376117
Remove nuts (16) from turbocharger (1). Remove turbocharger (1) from exhaust manifold (14). Note: Ensure that the weight of the turbocharger is supported as the nuts are loosened.
If necessary, remove studs (15) from exhaust manifold (14).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
Disconnect the hose assemblies from the turbocharger inlet and the turbocharger outlet. Refer to the Original Equipment Manufactures (OEM) for the correct procedure.
Disconnect the exhaust tube assembly. Refer to the OEM for the correct procedure.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Illustration 1 g03376116
Slide clip (9) along hose (10). Disconnect the hose from the actuator.
Follow Step 5.a through Step 5.d in order to remove tube assembly (4) from turbocharger (1).
Remove bolt (5).
Remove banjo bolt (2) and remove sealing washers (3) (not shown).
Remove tube assembly (4) from the cylinder block.
Remove O-ring seal (7) (not shown).
Follow Steps 6 through 6.d in order to remove tube assembly (11) from turbocharger (1).
Remove bolts (8).
Remove bolts (12).
Remove tube assembly (11) from turbocharger (1) and the cylinder block.
Remove gasket (6) (not shown) and gasket (13) (not shown).
Illustration 2 g03376117
Remove nuts (16) from turbocharger (1). Remove turbocharger (1) from exhaust manifold (14). Note: Ensure that the weight of the turbocharger is supported as the nuts are loosened.
If necessary, remove studs (15) from exhaust manifold (14).
Cat SIS web machinery list:
Parts flange Caterpillar catalog:
215, 215B, 215C, 215D, 219D, 2470C, 2570C, 2670C, 312, 312C, 315B L, 315C, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320N, 321C, 322 FM L, 322B L, 322B LN, 322C, 322C...
312, 315, 317, 320 L, 320B, 320N, 325, 325 LN
115, 315, 317, 623E, 623F, CTV15, CTV20, G315B, GSH15-60, GSH9, GSH9B, H140CS, H140DS, HA771, HA871, M325B, TK371, TK381, VRG-20/2
315, 317, 320 L, 320N, 322B L, 322C, 325, 325 LN, 325B, 325B L, 325C, 330, 330B L, E240C
115, 315, 317, 321C, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330B L, 330C, 330C L, H140CS, H140DS
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 325B L, 325C, 325D L, 330B L, 330C, 330C FM, 330C L, 330C MH, 345B L, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 973D, M315, M...
115, 315C, 318B, 318C, 319C, 319D, 319D LN, 320B, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322B L, 32...
120H, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14G, 14M, 160H, 160H ES, 160H NA, 163H NA, 16G, 24H, 320B, 322B L, 322B LN, 325B L, 330 L, 330B L, 345B II, 345B L, 5110B, 5130, 5130B, 5230, 5...
225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 2864C, 312D2, 324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2...
5110B, 623E, 623F, S305, S365B, S365C, VHS-50, VHS-60/3, VHS-60/4
24M, 651, 657, 772, 773, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775F, 775G LRC, 775G OEM
5110B, 5130, 5130B, 5230, 5230B, 797, 797B, 797F, 992K, 993K, S25
1564487
FLANGE
315B L, 317B LN
315B L, 317B LN
311B, 312B, 312B L, 315B, 315B FM L, 315B L, 317B LN, 318B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 539, W330B, W345B II
1765878
FLANGE
M318
M318
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M330D
1108825
FLANGE-ORFS
M312, M315, M318, M320
M312, M315, M318, M320
M312, M315, M318, M320
1924440
FLANGE
M312, M315
M312, M315
1645565
FLANGE-ORFS
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2
1710364
FLANGE
301.5, 302.5
301.5, 302.5
301.5
1296545
FLANGE
318B, 320 L, 320B
318B, 320 L, 320B
5E8841
FLANGE-SPLIT
318B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800, AP-900B, BG-225C, BG-2455C, BG-245C, CB-521, CB-525B, CB-535B, CB-544, CB-545, CP-563, CS-531, CS-533, CS-583, PM-565, PM-565B, PR-1000, RM...
318B, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-650B, AP-800, AP-900B, BG-225C, BG-2455C, BG-245C, CB-521, CB-525B, CB-535B, CB-544, CB-545, CP-563, CS-531, CS-533, CS-583, PM-565, PM-565B, PR-1000, RM...