FLANGE 8H1053 - Caterpillar

Illustration 1 g01224442
Two hydraulic filters are located on the right side of the machine. Open the access door on the right side of the machine.
Illustration 2 g01224449
Remove both filter elements with a strap type wrench.
Clean the filter element mounting bases. Remove any part of the filter element gasket that remains on the filter element mounting bases.
Apply a light coat of oil to the gasket of the new filter elements.
Install the new filter elements by hand. When the gasket contacts the filter element mounting base, tighten the filter element for an additional three quarters of a turn.
Illustration 3 g01215867
Maintain the hydraulic oil level so the oil is visible in the sight gauge. Add oil, if necessary.
Illustration 4 g01215747
Inspect the gasket on the cap for damage. Replace the gasket, if necessary.
Install the cap .
Close the access door.