FLANGE-HALF 8U0284 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Lift As 1 Start By:
Connect the steering frame lock.Note: The crankcase guard consists of three separate guards. Each guard can be removed independently.
Illustration 1 g01434521
Use Tooling (A) and suitable cribbing to support crankcase guard (1). The weight of crankcase guard (1) is approximately 52 kg (115 lb). Remove bolts (2) and use Tooling (A) to lower crankcase guard (1). Remove crankcase guard (1).
Illustration 2 g01434533
Use Tooling (A) and suitable cribbing to support crankcase guard (3). The weight of crankcase guard (3) is approximately 52 kg (115 lb). Remove bolts (4) and use Tooling (A) to lower crankcase guard (3). Remove crankcase guard (3).
Illustration 3 g01434543
Use Tooling (A) and suitable cribbing to support crankcase guard (5). The weight of crankcase guard (5) is approximately 79 kg (175 lb).
Remove bolts (7) and plates (8).
Remove bolts (6) and use Tooling (A) to lower crankcase guard (5). Remove crankcase guard (5).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Lift As 1
Illustration 4 g01434543
Use Tooling (A) and suitable cribbing to position crankcase guard (5). The weight of crankcase guard (5) is approximately 79 kg (175 lb). Install bolts (6).
Install plates (8) and bolts (7).
Illustration 5 g01434533
Use Tooling (A) and suitable cribbing to position crankcase guard (3). The weight of crankcase guard (3) is approximately 52 kg (115 lb). Install bolts (4).
Illustration 6 g01434521
Use Tooling (A) and suitable cribbing to position crankcase guard (2). The weight of crankcase guard (2) is approximately 52 kg (115 lb). Install bolts (2).End By:
Disconnect the steering frame lock.