FLANGE 8U0529 - Caterpillar

8U0529 FLANGE Caterpillar parts 206, 212, 214B, 224B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8U0529
8U-0529
8U0529

Weight: 5 pounds 2 kg.

Buy FLANGE 8U0529 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 8U0529:

EXCAVATOR 206 212 214B 224B Caterpillar

Number on catalog scheme: 4

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-5518 Main Bearing Tool 1 Start By:
Remove the engine oil pump.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01959044
Remove No. 1, 3, 5 and 7 main bearing caps (2). Remove the lower halves of crankshaft main bearings (1) from the main bearing caps. Note: If the crankshaft is turned in the wrong direction, the tab on the bearing will be pushed between the crankshaft and the bearing area in the cylinder block. This can result in damage to the cylinder block and/or the crankshaft.
Install Tooling (A) in the oil hole in the crankshaft journal. Turn the crankshaft in order to remove the upper halves of crankshaft main bearings (1).
Remove thrust plates (3) from the crankshaft.
Install No. 1, 3, 5, and 7 main bearing caps (2).
Remove the remaining No. 2, 4 and 6 main bearing caps (2). Remove the lower halves of crankshaft main bearings (1) from the main bearing caps.
Repeat Step 2.