2178166 FLASHER AS Caterpillar parts
120K, 120K 2, 120M, 12K, 140K, 140K 2, 160K, 924G, 924GZ, 930G, 938G II, 938H, 950 GC, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, IT28G, IT38G II, IT38H, IT62G II...
Rating:
Alternative (cross code) number:
CA2178166
217-8166
2178166
CA2178166
217-8166
2178166
Weight: 0.90 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compatible equipment models: 2178166:
Number on catalog scheme:
27
For full view, you need register
Information:
Remove Balance Shafts (3304)
start by:a) remove timing gear coverb) remove oil pump1. Put the engine on top center compression stroke. See FINDING TOP CENTER COMPRESSION POSITION FOR NO. 1 PISTON in TESTING AND ADJUSTING. 2. Remove bolts, lock and washer (1) that hold the balancer shafts in the cylinder block. 3. Remove balancer shaft (2) from the cylinder block.Install Balancer Shafts (3304)
1. Put clean engine oil on the balancer shaft. Put balancer shaft (1) in position in the cylinder block. Install washer (2), locks and bolts.2. Turn both balancer shafts until the flat part on each shaft is away from the oil pan plate. Install two 3/8"-16 NC bolts 1 1/2" long through the oil pan plate and into the holes in the balancer shafts. This will make the shafts so they will not turn. Do not tighten the bolts against the bottom of the holes in the shafts.3. Install oil pump. See INSTALL OIL PUMP.4. Remove the two 3/8"-16 NC bolts from the balancer shafts. Check to see that the balancer shaft timing is correct. The balancer shaft timing is correct when the holes in the balancer shafts are in alignment with the holes in the oil pan plate, and No. 1 piston is at the top center compression position.end by:a) install timing gear coverb) install oil pan
start by:a) remove timing gear coverb) remove oil pump1. Put the engine on top center compression stroke. See FINDING TOP CENTER COMPRESSION POSITION FOR NO. 1 PISTON in TESTING AND ADJUSTING. 2. Remove bolts, lock and washer (1) that hold the balancer shafts in the cylinder block. 3. Remove balancer shaft (2) from the cylinder block.Install Balancer Shafts (3304)
1. Put clean engine oil on the balancer shaft. Put balancer shaft (1) in position in the cylinder block. Install washer (2), locks and bolts.2. Turn both balancer shafts until the flat part on each shaft is away from the oil pan plate. Install two 3/8"-16 NC bolts 1 1/2" long through the oil pan plate and into the holes in the balancer shafts. This will make the shafts so they will not turn. Do not tighten the bolts against the bottom of the holes in the shafts.3. Install oil pump. See INSTALL OIL PUMP.4. Remove the two 3/8"-16 NC bolts from the balancer shafts. Check to see that the balancer shaft timing is correct. The balancer shaft timing is correct when the holes in the balancer shafts are in alignment with the holes in the oil pan plate, and No. 1 piston is at the top center compression position.end by:a) install timing gear coverb) install oil pan
Cat SIS web machinery list:
Parts flasher Caterpillar catalog:
120G, 120H, 120H NA, 120K, 120K 2, 12G, 12H, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H NA, 160K, 163H, 163H NA, 16G, 16H, 16H NA, 24...
914G, 924G, 928G, 938G, 950G, 950G II, 962G, 962G II, 966G, 972G, 980G, D250E, D300E, IT14G, IT14G2, IT28G, IT38G, IT62G, PF-300C, PS-300B
1734490
FLASHER AS
120H, 12H, 140H, 143H, 160H, 163H, 950G II, 962G II, 966G II, 972G II, 980G II
120H, 12H, 140H, 143H, 160H, 163H, 950G II, 962G II, 966G II, 972G II, 980G II
4Y9844
FLASHER AS
914G
914G
914G, 924G, 928G, 938G, 950G, 950G II, 962G, 962G II, 966G, 972G, 980G, D250E, D300E, IT14G, IT14G2, IT28G, IT38G, IT62G, PF-300C, PS-300B
6C8846
FLASHER
936F, 938F, 938G, 950F II, 960F, 966F II, 970F, IT38F, IT38G
936F, 938F, 938G, 950F II, 960F, 966F II, 970F, IT38F, IT38G
120H ES, 12H ES, 140H ES, 160H ES, 910E, 916, 918F, 924F, 926A, 928F, 928G, 936, 936F, 950B, 950F, 966D, 966F, 966F II, 980F II, 988F, 988F II, CB-434, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-...
611, 613C II, 615C, 621F, 623E, 623F, 627F, 631E, 633E II, 637E, 651E, 657E, PM-565, RM-350B, SM-350
5A3814
FLASHER UNIT
920, 930, 941, 950, 955K, 955L, 966C, 966D, D4D, D4E, D5, D5B, D6C, D6D
920, 930, 941, 950, 955K, 955L, 966C, 966D, D4D, D4E, D5, D5B, D6C, D6D
8J3044
FLASHER
613, 613B
613, 613B
2458589
FLASHER AS
901C, 902C, 903C
901C, 902C, 903C
3801887
FLASHER AS
924K, 930K, 938K
924K, 930K, 938K
2950447
FLASHER AS
924H, 928HZ
924H, 928HZ
924H, 924HZ, 928H, 928HZ, CB-44B, CB-54B, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B, CD-54B, CW-34