FLOOR MAT 1286071 - Caterpillar

Illustration 1 g03330713
Illustration 2 g03330711
Exhaust side of the cylinder head
Illustration 3 g03330714
Illustration 4 g03330712
Intake side of the cylinder head
Table 1
Specification for 378-5388 Fuel Injection Pump Gp and 376-3432 Fuel Injection Pump Gp
Item Qty Part Specification Description
- - - Use the following procedure in order to install the fuel injector group:
1. Lubricate seals (4) with clean engine oil. Lubricate the injector bore (6) with clean engine oil.
2. Place the injector into the bore. The pin (3) of the injector fits into the groove (5) of the cylinder head.
3. Place the fuel injector clamp (2) with the label "C9" in the UP position.
4. When the injector hits the bottom of the bore, torque the bolt (1) to standard torque.
5. Lubricate the bore and the nut of the quill assembly with clean engine oil. Also, lubricate the threads in the cylinder head with clean engine oil.
6. Insert the quill assembly (7) completely into the cylinder head. Ensure that the ball (8) of the quill assembly is in line with the slot (10) of the cylinder head.
9 1 278-5519 Nut Torque to 70 3 N m (52 2 lb ft).