FLYWHEEL AS 0R9986 - Caterpillar

(13)Tool Bar Adjusting Screws
Lubricate 2 fittings on each screw.(14)Hydraulic Control System
Inspect oil level with all equipment lowered with slight down pressure, oil warm, engine running at low idle, transmission in NEUTRAL and brake lock engaged. Oil must be visible in sight gauge. Add oil if necessary.(15)Cable Control Sheave Bearings
Lubricate 15 fittings (16)Tool Bar Cylinder Pivot Pins
Lubricate 1 fitting on each side of tractor.(17)Batteries
Clean top of batteries. Keep terminals clean and coated with petroleum jelly. Maintain electrolyte level at bottom of fill plug opening. At proper charge rate in temperate climate, a battery will not require more than 1 ounce (30 cc) of water per cell per week.