FLYWHEEL AS 1608195 - Caterpillar

Removal Procedure
Start By:
Release the system pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06263921
Remove bolts (1) and panel assemblies (2).
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 2 g06263964
Disconnect and reposition harness assembly (3), hose assembly (4), and hose assembly (6).
Remove bolts (7) and disconnect tube assembly (5).
Illustration 3 g06264002
Disconnect and reposition hose assembly (8).
Illustration 4 g06263981
Illustration 5 g06263982
Remove stud bolt (9) and bolt (10).
Remove two bolts (13).
Remove four bolts (11) and engine oil cooler (12).Installation Procedure
Install the engine oil cooler in the reverse order of removal.