FLYWHEEL 2P0175 - Caterpillar

Flow Meter Tee Test
Tee Test Tools
Introduction
This book has been completely revised from the former issue. The 5P3600 Flow Meter and the tools needed for its use have been added. In addition, changes have been made to the tools used with the 9S2000 Flow Meter to make them safer to use with the higher pressures being used on certain machines.
Tools that are not included in this book must not be used on machines with system pressures higher than 3000 psi (20 700 kPa).
9S2000 FLOW METER ASSEMBLY
5P3600 FLOW METER ASSEMBLY
A - PUMP SUPPLY LINE ADAPTERS
C - CONNECTING HOSE ASSEMBLIES
C - CONNECTING HOSE ASSEMBLIES
D - RETURN LINE ASSEMBLIES
E - TACHOMETER DRIVE ASSEMBLIES
F - BLOCKING PLATE ASSEMBLIES
G - TOOLS
H - PUMP SUPPLY LINE ADAPTERS Adapters For The 9S2000 & 5P3600 Flow Meter
This set of adapters can be used to make a hydraulic pump test on all Caterpillar machines. With these adapters, the Flow Meter can be connected to the pump outlet for a pump test. The adapters can also be used on systems with more than one pump, like the 992 Wheel Loader, to find which pump is damaged. Parts Required To Modify Older Loaders, Wheel Dozers And Compactors For "Tee Testing"