FLYWHEEL GP 3458902 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Reports have been made of oil leaks from the oil level gauge for the hydraulic tank at very early hours.Solution
The assembly tool that is used for installing a level gauge for the hydraulic oil has been improved. The assembly tool is used in order to change the position of the gauge to a horizontal position. The machines that are built after December 2009 have the improved assembly process. If oil leaks from the sight gauge for the hydraulic tank, replace the four 095-1519 O-Ring Seals . Refer to Illustration 1 for the location of the four O-Ring Seals.
Illustration 1 g02125780
227-0620 Sight Gauge Gp (1) 095-1519 O-Ring Seals