FLYWHEEL AS 4679809 - Caterpillar

4679809 FLYWHEEL AS Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4679809
467-9809
4679809

Weight: 129 pounds 58 kg.

Buy FLYWHEEL AS 4679809 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2

Caterpillar 4679809 Parts scheme FLYWHEEL AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

320 GC Excavator BR400001-UP (MACHINE) POWERED BY C4.4 Engine

503-4875: FLYWHEEL GP » M00908330035

323F LN Mobile Hydraulic Power Unit RGP00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00917520052

320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine

503-4875: FLYWHEEL GP » M00927690039

320 & 320 GC Excavators XBJ00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00994850069

320F L Excavator NHD00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00662810059

323F LN Excavator YEC00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00767860045

323F SA Excavator FA200001-10100 (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00772540044

323F SA Mobile Hydraulic Power Unit P7P00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00772580057

320 GC Excavator DKJ00001-UP (MACHINE) POWERED BY C4.4 Engine

503-4875: FLYWHEEL GP » M00852770049

320 Excavator HEX00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00859730167

325F L Excavators NDJ00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00860170089

323F LN Excavator MFY00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00860670038

323F LN Excavator FA210101-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » M00929510055

320F L Excavator YBM00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » SEBP75900059

325F L Excavators XAA00001-UP (MACHINE) POWERED BY C4.4 Engine

473-3686: FLYWHEEL GP » SEBP75940085

Information:

Image1
Image2
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-20000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 6.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Remove the pump assembly from engine. Rotate the pump assembly 180 degrees from the original position and place it on floor using the original spacers under the mounting bracket. Refer to Image1.1.1.
Image1.1.1
Rotate the elbow down 15 to 45 degrees to allow fit-up of the existing hose. Refer to Image1.2.1.
Image1.2.1
Turn the elbow adapters on pump upwards with pump assembly resting flat on the pump mounting bracket. Fit new 210-9599 Hose Assembly (1) and existing 241-0117 Hose Assembly(2). Position pump to prevent hose rubbing (3). Once the best positioning is determined, use bracket bolt holes (4) as a template to mark the mounting bolt hole pattern. Refer to Image1.3.1.
Image1.3.1
Drill and tap 5/16-18 THD mounting holes and mount pump to floor. Maximum hole depth should not exceed 12 mm depth to avoid penetration of spill containment area. Also, hole depth must be approximately 10 mm deep to prevent bottoming of bolts (thread engagement is approximately 8 mm). Use existing spacers with new 0S-1618 Bolts (4 total) to mount the pump to the floor. Original bolts will not be used. Verify bolts are not hitting the bottom of the hole. Refer to Image1.4.1.
Image1.4.1
Mount the relay box to the floor. Remove cover from relay box, and use the three mounting holes in the box as a template to mark mounting holes. Drill and tap holes in the floor and mount the relay box. Refer to Image1.5.1 and Image1.5.2.
Image1.5.1
Image1.5.2
Tighten all hose connections and verify that all hoses and conduit are routed and secured to prevent rubbing. Refer to Image 1.6.1. Run the generator set and verify proper operation.
Image1.6.1