FLYWHEEL GP 4733686 - Caterpillar

Creating A New Slope
Illustration 2 g01780511
To create a new slope element:
Illustration 3 g01780513
From any guidance screen, press and hold "Slope".The "Slope Memories" dialog appears.Note: You can also access the "Slope Memories" dialog from the "Vertical Setup" dialog.
Press the down arrow key until the higlight bar moves past the last item in the current list.A new slope element is created, with a slope of zero.
Use any of the following tools to set the slope.
Edit the "Slope" field directly.
Press +0.1 percent or -0.1 percent to add or subtract 0.1 percent to or from the current slope.Note: The actual soft key labels that are displayed depend on the increment/decrement values that have been set and the units selected for distance. For more information on setting the increment/decrement values, refer to Operation and Maintenance Manual, SEBU8501, "Setting Up For Operation".
To confirm the settings, press the "OK" key. To exit without saving the changes, press the Escape key.Editing A Depth Or Slope
Refer to the following steps in order to edit an existing depth or slope element.
From the Depth or Slope Memories dialog, press the up arrow key or the down arrow key until the element to be edited is highlighted.
Edit the element, and save changes.Refer to "Creating A New Slope".Note: You can also save changes by pressing up the arrow or the down arrow. This enables you to edit a number of elements in succession without leaving the dialog.Deleting A Depth Or Slope
To delete a depth or slope element from memory:
From the "Depth or Slope Memories" dialog, press up arrow or the down arrow until the element to be deleted is highlighted.
Press the "Delete" .
To confirm the changes, press the "OK" button. To exit without saving the changes, press the Escape key.Creating A Profile
Profile elements are stored in profile memory. This memory is only accessible when the Profile vertical guidance method has been selected.Creating A New Profile
To create and select a new profile:
From any guidance screen, press "Profile".The "Select Profile" dialog appears.
Illustration 4 g01780512
Press "Create New".The "Profile Definition" dialog appears, with the point of origin of the profile displayed as a green point.
Use any of the following tools to create the new profile:
Press "Use Bucket" in order to align the current position of the bucket focus to the origin of the profile. You are asked to move the bucket so that the bucket focus is at the origin of the profile you are creating, and then to press the "OK" key.Cross hairs appear in the Profile Definition dialog's design pane, indicating the current position of the bucket relative to the origin. The "Use Bucket" soft key is replaced with the "Point Here" soft key.
Illustration 5 g01780514
Once you have aligned the bucket focus with the origin, you can press "Point Here" at any time in order to add a line segment to the profile. A new point appears in the Profile Definition dialog's design pane at the current position of the bucket focus.The new point defines a new line segment. Both the new point and the new line