FLYWHEEL 4N0067 - Caterpillar

Remove panel (3) .
Illustration 3 g01183078
Illustration 4 g01183080
Remove guards (4) and (5). Remove hose (6). Disconnect hose (8) and elbow (10). Remove panels (7) and (9) .
Illustration 5 g01183754
Disconnect harness assembly (11) and remove belt (12) from the compressor. Remove mounting bolts (14) and position compressor (13) aside.
Illustration 6 g01183771
Remove bolts (15) and (16) .
Illustration 7 g01183755
Remove bolt (17) and bracket (18) .
Illustration 8 g01183759
Disconnect hoses (19), (22), and (23). Remove mounting bolts (20) and water pump (21) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 9 g01183759
Position water pump (21) and install mounting bolts (20). Connect hoses (23), (22), and (19) .
Illustration 10 g01183755
Install bracket (18) and bolt (17) .
Illustration 11 g01183771
Install bolts (16) and (15) .
Illustration 12 g01183754
Position compressor (13) and install mounting bolts (14). Install belt (12) onto the compressor and connect harness assembly (11) .
Illustration 13 g01183078
Illustration 14 g01183080
Install panels (7) and (9). Connect hose (8) and elbow (10). Install guards (4) and (5). Install hose (6) .
Illustration 15 g01183077
Install panel (3) .
Illustration 16 g01183075
Close hood (2) and access panel (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Level - Check".