FLYWHEEL AS 4W2941 - Caterpillar

Table 2
Recommended Lubricant for Manual Lubrication    
Grease     NLGI     Degrees Celsius     Degrees Fahrenheit    
Caterpillar Multipurpose Lithium Complex (MPGM)     2     Min     Max     Min     Max    
-18 +149     0     +300    
Table 3
Recommended Lubrication for the Automated Lubrication System (1) (2) (3)    
Grease     NLGI     Degrees Celsius     Degrees Fahrenheit    
Caterpillar Autolube     1     -18     +29     0     +85    
Caterpillar Autolube     2     -1     +41     +30     +105    
Caterpillar Autolube     0     -29     +10     -20     +50    
Caterpillar Arctic Platinum     000     -59     +4     -75     +40    
Caterpillar Desert Gold     2     +4     +66     +40     +150    
( 1 ) In order to use a non-Caterpillar lubricant, the supplier must certify that the lubricant is compatible with Caterpillar's grease. Otherwise, each pin joint should be fully flushed with the new lubricant in order to entirely remove the Caterpillar lubricant. Failure to meet this requirement may lead to failure of a pin joint due to premature breakdown of the lubricant.
( 2 ) The grease that is used with the Groeneveld Automatic TWIN Greasing System, must not contain any graphite or PTFE
( 3 ) For additional information on these greases, refer to Caterpillar Machine Fluids Recommendations, SEBU6250-12, "Lubricating Grease".