6N8042 FLYWHEEL Caterpillar parts
Rating:
Alternative (cross code) number:
CA6N8042
6N-8042
6N8042
CA6N8042
6N-8042
6N8042
Information:
Priming the Fuel System
1. Unlock the priming pump plunger and operate the pump.2. When there is a strong resistance to the operation of the pump plunger, lock the plunger.3. Start the engine and inspect for leaks.4. If the engine will not start or continues to misfire or smokes, further priming is necessary. If the engine is stopped, use the fuel priming pump to supply fuel to the injection lines. 5. With the engine running, loosen the fuel line nuts at the injector inlets, one at a time, several times in succession. Allow the fuel to run until free of air bubbles.6. Tighten the fuel line nuts to 40 7 N m (30 5 lb ft).Fuel Tank Cap and Fill Screen
Wash Cap and Screen
1. Remove the fuel tank cap.2. Inspect the cap gasket. Replace the gasket if it is damaged. 3. Remove the retaining snap ring. 4. Remove the screen.5. Disassemble the cap.6. Wash all the parts in clean, nonflammable solvent.7. Lightly oil the element. Assemble the cap.8. Install the screen, the retaining snap ring and the cap.Engine Crankcase Breathers
Clean
1. Stop the engine. Loosen the hose clamp and remove the hose from the breather.2. Loosen the breather retaining clamp bolt. 3. Remove the clamp and the breather.4. Wash the breather in clean, nonflammable solvent. 5. Install the breather and clamp. Tighten the clamp.6. Reconnect the hose and clamp to the breather. Tighten hose clamp.7. Remove and clean the breather on the other side of the engine, using the same procedures.Transmission Filters
Change Filters
1. Remove the transmission charge filter housing drain plug and drain the oil. Clean and install the drain plug. Removing the drain plug from the bottom of the filter housing may not drain the oil from the filter. When removing the housing and element,
1. Unlock the priming pump plunger and operate the pump.2. When there is a strong resistance to the operation of the pump plunger, lock the plunger.3. Start the engine and inspect for leaks.4. If the engine will not start or continues to misfire or smokes, further priming is necessary. If the engine is stopped, use the fuel priming pump to supply fuel to the injection lines. 5. With the engine running, loosen the fuel line nuts at the injector inlets, one at a time, several times in succession. Allow the fuel to run until free of air bubbles.6. Tighten the fuel line nuts to 40 7 N m (30 5 lb ft).Fuel Tank Cap and Fill Screen
Wash Cap and Screen
1. Remove the fuel tank cap.2. Inspect the cap gasket. Replace the gasket if it is damaged. 3. Remove the retaining snap ring. 4. Remove the screen.5. Disassemble the cap.6. Wash all the parts in clean, nonflammable solvent.7. Lightly oil the element. Assemble the cap.8. Install the screen, the retaining snap ring and the cap.Engine Crankcase Breathers
Clean
1. Stop the engine. Loosen the hose clamp and remove the hose from the breather.2. Loosen the breather retaining clamp bolt. 3. Remove the clamp and the breather.4. Wash the breather in clean, nonflammable solvent. 5. Install the breather and clamp. Tighten the clamp.6. Reconnect the hose and clamp to the breather. Tighten hose clamp.7. Remove and clean the breather on the other side of the engine, using the same procedures.Transmission Filters
Change Filters
1. Remove the transmission charge filter housing drain plug and drain the oil. Clean and install the drain plug. Removing the drain plug from the bottom of the filter housing may not drain the oil from the filter. When removing the housing and element,
Parts flywheel Caterpillar catalog:
6N8039
FLYWHEEL
Caterpillar
Caterpillar
6N8035
FLYWHEEL
Caterpillar
Caterpillar
6N8034
FLYWHEEL
Caterpillar
Caterpillar
6N8033
FLYWHEEL
Caterpillar
Caterpillar
6N8032
FLYWHEEL
Caterpillar
Caterpillar
6N8020
FLYWHEEL
Caterpillar
Caterpillar
6N9342
FLYWHEEL G
Caterpillar
Caterpillar
6N8848
FLYWHEEL
Caterpillar
Caterpillar
6N8796
FLYWHEEL
Caterpillar
Caterpillar
6N8531
FLYWHEEL GRP
Caterpillar
Caterpillar
6N8049
FLYWHEEL
Caterpillar
Caterpillar
6N8047
FLYWHEEL
Caterpillar
Caterpillar