FLYWHEEL GP 9N3136 - Caterpillar

Output Shaft Speed Limit
The Output Shaft Speed Limit feature allows a technician or the operator to set an output shaft speed limit for the transmission using Caterpillar Electronic Technician. When the limit is set, the transmission will limit the engine speed so that the output shaft speed will not exceed the programmed limit.Output Shaft Torque Limit
The Output Shaft Torque Limit feature allows a technician or the operator to set an output shaft torque limit for the transmission using Caterpillar Electronic Technician. When the limit is set, the transmission will limit the engine torque so that the transmission output shaft torque will not exceed the programmed limit.Converter Drive Indicator
The Converter Drive Indicator feature will turn on a lamp (amber) when the transmission is in converter drive. The lamp will turn off when the transmission lockup clutch is engaged.Transmission PTO
The Transmission PTO feature controls two PTO enable output drivers. The PTO enable driver is used to control an OEM supplied control system connected to the transmission's auxiliary output shaft(s). This output will be turned ON when the switch is in the ON position and all the programmed conditions have been met.Note: The PTO Enable Output will NOT be enabled if the PTO Enable Switch input is in the ON position at key switch ON. The switch input must be toggled from OFF to ON before the output will be enabled. This prevents the output from being engaged without operator interaction.PTO Switch Operation
PTO #1 driver will be active when PTO #1 switch is in the ON position (closed to sensor common). PTO #2 driver will be active when PTO #2 switch is in the ON position (closed to sensor common).PTO Minimum Gear
The