9Y1749 FLYWHEEL AS Caterpillar parts
446, 446B
Rating:
Alternative (cross code) number:
CA9Y1749
9Y-1749
9Y1749
CA9Y1749
9Y-1749
9Y1749
Weight: 80 pounds 36 kg.
BACKHOE LOADER,
Number on catalog scheme:
1
For full view, you need register
Caterpillar parts catalog:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01125899
Carefully install camshaft (4) in the cylinder block.
Install thrust plate (3) .
If necessary, rotate camshaft gear (1) in order to access thrust plate (3). Install bolts (2) .
Ensure that the No. 1 cylinder is at the top center compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Ensure that the timing marks on the following gears are aligned: the camshaft drive gear, the idler gear and the crankshaft gear.End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the rocker arms and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01125899
Carefully install camshaft (4) in the cylinder block.
Install thrust plate (3) .
If necessary, rotate camshaft gear (1) in order to access thrust plate (3). Install bolts (2) .
Ensure that the No. 1 cylinder is at the top center compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Ensure that the timing marks on the following gears are aligned: the camshaft drive gear, the idler gear and the crankshaft gear.End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the rocker arms and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Parts flywheel Caterpillar catalog:
1856649
FLYWHEEL GP
446B, 446D
446B, 446D
7W8528
FLYWHEEL GP
446, 446B
446, 446B
1608187
FLYWHEEL AS
446B, 446D
446B, 446D
4W2941
FLYWHEEL AS
3054B, 416B, 426B, 428, 428B
3054B, 416B, 426B, 428, 428B
1253252
FLYWHEEL AS
3306, 3306B
3306, 3306B
1673C, 3306, 3306B, 3306C
7N0748
FLYWHEEL AS
3304, 3306, 3306B
3304, 3306, 3306B
1673C, 3176B, 3304, 3306, 3306B, 3306C, G3306
4P7280
FLYWHEEL AS
65, 65C
65, 65C
3054C, 3054E, 3056E, 414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E,...
1137555
FLYWHEEL AS
3054, 3054B, 3056, PS-300B, TH103, TH62, TH63, TH82, TH83
3054, 3054B, 3056, PS-300B, TH103, TH62, TH63, TH82, TH83
1630424
FLYWHEEL AS
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C11, C13, CX31-C13I, M330D, MTC835, TH35-C11I, TH35-C13I
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C11, C13, CX31-C13I, M330D, MTC835, TH35-C11I, TH35-C13I
1088608
FLYWHEEL AS
35, 45, 55
35, 45, 55
1608160
FLYWHEEL AS
3126B, 35, 45, 55
3126B, 35, 45, 55