FOOTREST GP 4Z6527 - Caterpillar

Illustration 2 g03693933
Remove panel assembly (2).
Illustration 3 g03693941
Disconnect harness assemblies (3). Disconnect all clips and hardware that secure harness assemblies (3) to the cab.
Illustration 4 g03786571
Disconnect harness assemblies (5). Disconnect hose assemblies (4). Remove the bolts and disconnect bracket (6) from the machine.
Illustration 5 g03885604
Disconnect hose assemblies (6a).
Illustration 6 g06318595
Disconnect hose assemblies (6b).
Illustration 7 g03786561
Disconnect hose assemblies (7).
Illustration 8 g03786714
Located under cab.
Illustration 9 g03786715
If necessary, remove bolt (8). Cut cable strap (9).
Illustration 10 g03786660
Front of cab.
Disconnect hose assemblies (10).
Illustration 11 g06318577
Front of cab.
Disconnect hose assemblies (10A).
Illustration 12 g03786849
Remove four bolts (11) to disconnect the cab lift cylinder.
Illustration 13 g03787129
Attach Tooling (A) and a suitable lifting device to cab (12). The weight of cab (12) is approximately 998 kg (2200 lb).
Illustration 14 g03787163
Disconnect ground strap (13).
Remove rear pin (14). Repeat for opposite side.
Illustration 15 g03787173
Remove front pin (15). Repeat for opposite side.
Illustration 16 g03787129
Remove cab (12).Installation procedure
Install cab (12) in the reverse order of removal.