FOOTSHAFT GP 3993297 - Caterpillar

Starting the Engine
The engine will not crank:
Any one of the six remote stop switches is pushed in.
Neutral reset (Button release) of all controls required for all features to function after emergency stop switch activation.Propelling the Machine
Propelling the machine will not occur:
The service door for the rotor is open.
Machine control system detects a fault in the propel system. An error message will be displayed on the monitoring system.
The conveyor swing lock is unlocked.
One or more of the machine legs are extended above pre-service height.Manual Elevation
The front of the machine will not lower:
The rotor service door is open.Note: There are no interlocks for raising the machine when the rotor service door is open.None of the elevation controls will work:
The conveyor swing lock is unlocked.
The rotor service door is open and all the machine legs are at maximum extension.Steering
Steering by the rear tracks will not occur:
The service door of the rotor is open.
Machine control system detects a fault in the steering system.
The conveyor swing lock is unlocked.Control for Rotor
There is no engagement of the rotor under the following circumstances:
The service door for the rotor is open.
Machine control system detects a fault in the rotor control.
The conveyor swing lock is unlocked.Service Door for the Rotor
The service door for the rotor will not open under the following circumstances:
The rear legs are not in the service height position.
The conveyor swing lock is unlocked.Conveyor
Conveyor does not operate:
The conveyor swing lock is unlocked.