FORK 0973280 - Caterpillar

Illustration 26 g03367838
"Network Information" window
Office and on-board software use the radio network to communicate. In older systems, the network may be a RAScm IP network, however now most systems use a broadband network. The "Network Information" diagnostics window lists address data for two networks, and the RAScm network.
Menu - Opens the main menuTo open the "Network Information" window, open the main menu and select "Diagnostics" > "Network Info".Table 21 describes the headings in the window.
Table 21
"Network Information" Window
Heading Description Example
"MAC Address" Media Access Control address. A unique identifier assigned to network interfaces for communications. 78-2B-2B-9C-86-48
"Eth IP Address" Ethernet ("Eth") is a family of protocols used in Local Area Networks (LANs). An Internet Protocol address (IP address) is a numerical label assigned to each device, for example each G610 display or each office computer. 10.3.17.16
"DNS1 Address" The Domain Name System (DNS) is a hierarchical naming system for computers, services, or any resource connected to the Internet or a private network. 10.3.0.124
"DNS2 Address" 10.3.0.125
"Gateway Address" The gateway address is a router interface connected to the local network that sends packets out of the local network. The "Gateway Address" is the logical gateway address. The "MAC Address" is the physical gateway address. 10.3.16.1
"RAS IP Address" IP address for the RAS Connection Manager (IP radio only). RAScm connects the on-board software to the IP radio. "Zone Diagnostics" Window
Illustration 27 g03376023
"Zone Diagnostics" window
Site managers use zones to emphasize different areas of the site and highlight dangers or delineate work areas. Zones are created in the following strategies:Avoidance Strategy - The strategy uses zones and surfaces stored in *.cat files that are generated from DXF files in Terrain office software.Detect Strategy - The strategy uses zones stored in *.mwf files created in Fleet with or without Command or Detect office systems.The on-board software from v5.0 onwards supports both types of files.Note: The "Zone Diagnostics" window specifically refers to the Detect strategy.The "Zone Diagnostics" window lists all zones provided in the zone.mwf file. Each time the machine starts up, the office sends a complete and current zone.mwf file to the machine. After start-up, if the zone.mwf file in the office is updated, then the office sends an update message to the machine containing the new information.
Menu - Opens the main menuTo open the "Zone Diagnostics" window, open the main menu and select "Diagnostics" > "Zones".Table 22 describes the headings in the window.
Table 22
"Zone Diagnostics" Window
Heading Description
"Name" When the zone.mwf file was set up in the office software, this name was entered in the "Name" field.
"Color" The color of the zone edge and hatching, and the hexadecimal code for that color, are set up in the office software.
"Cleanup