AVSPARE.COM
parts catalog

FRAME A 0878077 - Caterpillar



0878077 FRAME A Caterpillar parts FRAME
Rating:
71
Alternative (cross code) number:
CA0878077
087-8077
0878077
Caterpillar 0878077 FRAME A

Buy FRAME A 0878077 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 5 g03710264
(3) Electrical box (4) Generator cable harness (5) Nut (6) Breaker harness
Unscrew nuts (5) that attach generator cable harness (4) to electrical box (3). Refer to Illustration 5.
Unscrew nuts (5) that attach cables for the breaker harness (6) to electrical box (3). Refer to Illustration 5.
Mark all of the points of the electrical cables, use the marks as reference during installation of new electrical box assembly.
Illustration 6 g03710301
(3) Electrical box (4) Generator cable harness (6) Breaker harness
Remove generator cable harness (4) and breaker harness (6) from electrical box (3) .
Illustration 7 g03710302
(7) Breaker box support (8) Breaker box
Remove breaker box support (7) from frame and remove breaker box (8) from support. Retain the removed hardware for later use.
Illustration 8 g03710303
(3) Electrical box (9) Ground cable
Remove electrical box (3) and unscrew ground cable (9) .
Illustration 9 g03710367
(10) Internal plate
Remove internal plate (10) with all electrical components in electrical box (3) .Note: Save the internal plate and electrical components for installation in electrical box (A). Retain removed hardware for installation of plate in electrical box (A) .
Illustration 10 g03710369
(10) Internal plate
Install internal plate (10) with electrical components in electrical box (A) .
Illustration 11 g03710371
(A) Electrical box (7) Breaker box support
Attach breaker box support (7) and electrical box (A) to machine frame.
Illustration 12 g03710437
(A) Electrical box (B) Connector As (C) Locknut (4) Generator cable harness
Assemble 464-4098 Connector As (B) with 464-4099 Locknut (C) in electrical box (A). Insert generator cable harness (4) in this connection.
Illustration 13 g03710439
Electrical cables installed in electrical box
Connect all electric cables in the box. Refer to Illustration 13.
Illustration 14 g03710441
(11) Ground screw cable
Insert ground screw cables (11) in the frame ground point.
Illustration 15 g03710444
Install the cover on electrical box (12) and breaker box support (7) .
Illustration 16 g03710194
Reinstall the left rear wheel.Note: Refer to Disassembly and Assembly, UENR3277, "AP300D Asphalt Paver Machine Systems", "Wheel (Rear) - Remove and Install" for installation procedure.
Reinstall the screed. Refer to Disassembly and Assembly, UENR3277, "AP300D Asphalt Paver Machine Systems", "Screed - Remove and Install" for installation procedure.
Turn the battery connect switch to the ON position Verify and check all machine functionality.


Parts frame Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.