FRAME GP-WINDOW 1365222 - Caterpillar

Illustration 1 g03586897The push bar is 1.98 m (6.5 ft) long and is mounted to the front hitch. The push bar is used for pushing a water truck.Storage
Perform the following steps in order to place the push bar in the storage position:
Lift pin (1).
Slide the inner section of the bar into the outer section.
Insert pin (1) in the bar.
Swing the bar to the side of the machine.
Lock the push bar in place with pin (2). Attaching to a Water Truck
Perform the following steps in order to attach the push bar to a water truck:
Disconnect the push bar from pin (2).
Rotate the push bar from the storage position to the forward position.
Using a spotter, position the water truck in front of the soil stabilizer. The truck should be just in front of the push bar.
Place the soil stabilizer and water truck in park.
Lift pin (1), and extend the push bar outward toward the water truck.
Secure the eye of the push bar to the water truck hitch. The push bar should be extended, and between the inner and outer pin positions for pin (1).
Clear the hitch area of personnel. Drive the water truck slowly away from the soil stabilizer until pin (1) falls into place.