FRAME AS-ROLLER 1380576 - Caterpillar

Table 1
APPROXIMATE REFILL CAPACITIES    
Compartment or System    Liters    US gal    Imperial gallon    
Cooling System     92     24.3     20.2    
Fuel Tank     409     108     90    
Engine Crankcase and Filter     37.9     10     8.3    
Power Train Oil System     190     50     41.6    
Hydraulic Tank Oil     101     26.6     22.2    
Final Drives     13     3.4     2.8    
Recoil Spring Compartment     74     19.5     16.2    
Winch Case (Boom)     11.3     3.0     2.5    
Winch Case (Hook)     15.1     4.0     3.3    Note: When you are operating on severe slopes (greater than 25 degrees or greater than 47 percent), the quantity of oil in the power train can be increased by as much as 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.Note: For severe slope operation, engine oil should be maintained on the full mark. The engine should never be overfilled with oil.Ecology Drains
Table 2
Ecology Drain (Components)    
Location (Drain)     Needed Component    
Coolant     None    
Transmission     12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Torque Converter    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Engine Oil    
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread    
Hydraulic Tank     126-7914 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread    
Bevel Gear Case     4C-8563 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread