FRAME AS-CARBODY 1510562 - Caterpillar

1510562 FRAME AS-CARBODY Caterpillar parts 365B, 365B II, 365C, 365C L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1510562
151-0562
1510562

Weight: 9820 pounds 4454 kg.

Buy FRAME AS-CARBODY 1510562 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, MOBILE HYD POWER UNIT,

Compatible equipment models: 1510562:

EXCAVATOR 365B 365B II 365C 365C L

MOBILE HYD POWER UNIT Caterpillar

Number on catalog scheme: 1

Caterpillar 1510562 Parts scheme FRAME AS-CARBODY

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-2998 Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply Tooling (A) to both ends of the pushrods.
Apply Tooling (A) to each of the bottom faces of the rocker arms.
Illustration 1 g06115456
Illustration 2 g06115502
Illustration 3 g02151190
View showing stud bolt (2) locations.
Install pushrods (7).
Align the rocker arm shaft assembly with locating dowel (X). Position the rocker arm shaft assembly. Install bolts (8) and nuts (2). Tighten bolts (8) and nuts (2) to standard torque.
Position rocker arm adjustment screws (5) and tighten nuts (6). Adjust the valve lash of the rocker arms. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
Illustration 4 g06115616
Illustration 5 g06115672
Position harness assembly (3). Hold stud bolts (2) stationary and install nuts (1).
Connect harness assemblies (4) and carefully position locking spring (Z) into position.End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".