FRAME AS 1763712 - Caterpillar

Illustration 1 g00480325
Right Side View
The right camshaft bearings from the front surface of the cylinder block are the following dimensions: (A) ... 3679.0 1.0 mm (144.84 0.04 inch) (B) ... 3219.0 1.5 mm (126.73 0.06 inch) (C) ... 2759.0 1.0 mm (108.62 0.04 inch) (D) ... 2299.0 1.5 mm (90.51 0.06 inch) (E) ... 1839.0 1.5 mm (72.40 0.06 inch) (F) ... 1379.0 1.5 mm (54.29 0.06 inch) (G) ... 919.0 1.5 mm (36.18 0.06 inch) (H) ... 459.0 1.5 mm (18.07 0.06 inch) (I) ... The front camshaft bearing should be flush with the front surface of the cylinder block.
Illustration 2 g00480328
Left Side View
The left camshaft bearings from the front surface of the cylinder block are the following dimensions: (J) ... The rear camshaft bearing should be flush with the rear surface of the cylinder block. (K) ... 3301.0 1.5 mm (129.96 0.06 inch) (L) ... 2841.0 1.5 mm (111.85 0.06 inch) (M) ... 2381.0 1.5 mm (93.74 0.06 inch) (N) ... 1921.0 1.5 mm (75.63 0.06 inch) (O) ... 1461.0 1.5 mm (57.52 0.06 inch) (P) ... 1001.0 1.5 mm (39.41 0.06 inch) (Q) ... 541.0 1.5 mm (21.30 0.06 inch) (R) ... 81.0 1.0 mm (3.19 0.04 inch)