FRAME AS-TRACK ROLLER 1C9439 - Caterpillar

1C9439 FRAME AS-TRACK ROLLER Caterpillar parts OEMS

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1C9439
1C-9439
1C9439

Caterpillar 1C9439 FRAME AS-TRACK ROLLER

Buy FRAME AS-TRACK ROLLER 1C9439 Caterpillar genuine, new aftermarket tractor parts with delivery
UNDERCARRIAGE,

Compatible equipment models: 1C9439:

UNDERCARRIAGE OEMS Caterpillar

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the carrier bearing (drive shaft).
Illustration 1 g03662947
Remove bolts (2). Use two people to remove front drive shaft (1). The weight of front drive shaft (1) is approximately 36 kg (80 lb). Remove front drive shaft (1).Installation Procedure
Install front drive shaft (1) in the reverse order of removal.
Tighten bolts (2) in an X pattern to a torque of 150 15 N m (111 11 lb ft). Retighten bolts (2) to a torque of 150 15 N m (111 11 lb ft).Note: Replace the run down bolts with the new drive line bolts.Note: If a new drive shaft is to be installed, do not remove the carrier bearing alignment block until the drive shaft is fully installed.