FRAME AS 2240782 - Caterpillar

Illustration 1 g00904440
(A) Adjust the shroud to the proper clearance. ... 1.0 + 2.0 - 0.5 mm (0.04 + 0.08 - 0.02 inch)Note: Tractors do not have a shroud. (2) Torque for 24 studs ... 170 30 N m (125 22 lb ft) (3) Torque for 24 nuts ... 430 60 N m (317 44 lb ft) (4) Torque for 26 nuts ... 430 60 N m (317 44 lb ft) (5) Torque for 16 nuts ... 440 40 N m (325 30 lb ft) (6) Install the two pins above the bore. ... 7.6 0.5 mm (0.30 0.02 inch) (7) 9M-5874 Shim Pack Quantity ... As required Shim Pack thickness ... 0.130 mm (0.005 inch)Note: Refer to Testing and Adjusting, "Differential and Bevel Gear - Adjust" before shims (7) are installed. (8) Final torque for 18 bolts ... 50 5 N m (37 4 lb ft)Note: Bolts (8) must be turned 60 degrees past the final torque. (9) Lubricate the sealing lip with a small amount of the lubricant that is being sealed. (10) Lubricate the bore with a small amount of the lubricant that is being sealed. (11) 125-8649 Shim Quantity ... 10 Thickness ... 0.12 mm (0.005 inch) 125-8650 Shim Quantity ... 10 Thickness ... 0.18 mm (0.007 inch)
Illustration 2 g00904496
View A-A (12) Torque for four bolts ... 1300 150 N m (959 111 lb ft)
Illustration 3 g00904480
View B-B
Illustration 4 g00904481
View C-C (13) Apply 155-0695 Thread Lock Compound to the threads of the bolts before installation.