2286551 FRAME GP-TRACK ROLLER Caterpillar parts
BG-2455D
Rating:
Alternative (cross code) number:
CA2286551
228-6551
2286551
CA2286551
228-6551
2286551
ASPHALT PAVER,
Compatible equipment models: 2286551:
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1
Illustration 1 g01228274
Typical Example
Illustration 2 g01228276
Typical Example
Note: The camshaft can be installed from either end of the engine.
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (B) into the ends of the camshaft. Install Tooling (C). Note: If, Tooling (A) was removed use the following Steps in order to install Tooling (A).
Install Tooling (B) into the engine until Tooling (B) is through the second camshaft bearing.
Slide Tooling (A) over Tooling (B).
Tighten the bolts for Tooling (A).
Remove Tooling (B).
Illustration 3 g02441230
Attach a suitable lifting device to the middle of camshaft (27). The weight of camshaft (27) is approximately 95 kg (210 lb). Install camshaft (27) halfway into the engine. Remove the suitable lifting device. Install camshaft (27). Use Tooling (C) in order to rotate camshaft (27). Rotate camshaft (27) in order to install camshaft (27).
Illustration 4 g02441229
Install cover (25). Install bolts (26).
Illustration 5 g02441227
Install housing (23). Install bolts (24). Connect tube assembly (21) and (22).
Illustration 6 g02441225
Install retainer (20). Install the washers and bolts (19).
Illustration 7 g02441223
Rotate the engine so that the number one piston is at top dead center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston". Install cam gear (18). Install spacer (17). Install bolt (16). Install bolts (15).
Illustration 8 g02440957
Install tube assemblies (13) and (14). Connect tube assembly (12).
Install cover (11). Install bolts (10). Install cover (9). Install bolts (8).
Illustration 9 g02440956
Connect harness assemblies (7). Install shield (4). Install bolts (6).
Install lifting mount (3). Install bolts (5). Install elbows (1) and (2).
Install sections of the heat shield removed to gain access to the components.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
turn the fuel supply to the ON position. End By:
Install the aftercooler.
Install the valve lifter.
Install the oil filter housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1
Illustration 1 g01228274
Typical Example
Illustration 2 g01228276
Typical Example
Note: The camshaft can be installed from either end of the engine.
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (B) into the ends of the camshaft. Install Tooling (C). Note: If, Tooling (A) was removed use the following Steps in order to install Tooling (A).
Install Tooling (B) into the engine until Tooling (B) is through the second camshaft bearing.
Slide Tooling (A) over Tooling (B).
Tighten the bolts for Tooling (A).
Remove Tooling (B).
Illustration 3 g02441230
Attach a suitable lifting device to the middle of camshaft (27). The weight of camshaft (27) is approximately 95 kg (210 lb). Install camshaft (27) halfway into the engine. Remove the suitable lifting device. Install camshaft (27). Use Tooling (C) in order to rotate camshaft (27). Rotate camshaft (27) in order to install camshaft (27).
Illustration 4 g02441229
Install cover (25). Install bolts (26).
Illustration 5 g02441227
Install housing (23). Install bolts (24). Connect tube assembly (21) and (22).
Illustration 6 g02441225
Install retainer (20). Install the washers and bolts (19).
Illustration 7 g02441223
Rotate the engine so that the number one piston is at top dead center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston". Install cam gear (18). Install spacer (17). Install bolt (16). Install bolts (15).
Illustration 8 g02440957
Install tube assemblies (13) and (14). Connect tube assembly (12).
Install cover (11). Install bolts (10). Install cover (9). Install bolts (8).
Illustration 9 g02440956
Connect harness assemblies (7). Install shield (4). Install bolts (6).
Install lifting mount (3). Install bolts (5). Install elbows (1) and (2).
Install sections of the heat shield removed to gain access to the components.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
turn the fuel supply to the ON position. End By:
Install the aftercooler.
Install the valve lifter.
Install the oil filter housing.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts frame Caterpillar catalog:
2065958
FRAME GP-TRACK ROLLER
AP-1055B, BG-2455D
AP-1055B, BG-2455D
2222609
FRAME GP-MAIN
BG-2455D
BG-2455D
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H ES, 140H NA, 143H, 14H NA, 160H ES, 163H NA, 16H NA, 24H, 30/30, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 330B ...
1141072
FRAME AS
AP-1000, AP-1000B, AP-1050, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E...
AP-1000, AP-1000B, AP-1050, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E...
3405124
FRAME AS
AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455D, BG1055E, BG655D
AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455D, BG1055E, BG655D
2394138
FRAME AS
AP-1055D, AS2301, BG-2455D, BG-260D
AP-1055D, AS2301, BG-2455D, BG-260D
2307536
FRAME AS
AP-1055D, AS2301, BG-2455D, BG-260D
AP-1055D, AS2301, BG-2455D, BG-260D
3532363
FRAME AS
AP-1055D, AS2301, BG-2455D, BG-260D
AP-1055D, AS2301, BG-2455D, BG-260D
3133927
FRAME AS
10-20B, AP-1055D, BG-2455D, BG-260D
10-20B, AP-1055D, BG-2455D, BG-260D
2370426
FRAME AS-LOADER
950H, 962H
950H, 962H
8D3190
FRAME AND CASE GROUP
621, 623, 627
621, 623, 627
2065959
FRAME GP-TRACK ROLLER
AP-1055B, BG-2455D
AP-1055B, BG-2455D
1730341
FRAME AR-UNDERCARRIAGE
345B II
345B II
6D5600
FRAME
14E
14E
1705758
FRAME AS-TRACK ROLLER
D8R, D8R II
D8R, D8R II
9C3131
FRAME GP-TRACK ROLLER
215C, 219D, 225D, 229
215C, 219D, 225D, 229
1105660
FRAME GP-UPPER
325, 325 L
325, 325 L