FRAME AS-HOOD 2778311 - Caterpillar

(3) Torque for four screws ... 25 7 N m (18 5 lb ft)(4) Assembled length of rod assembly as measured in a straight line between centerlines of studs on rod ends ... 1215.0 mm (47.83 in)(6) Torque for nuts (3/8 in) ... 12 4 N m (9 3 lb ft)Linkage Adjustment: Adjust rods (4) and (5) and rod ends so that valve spools move their full travel and also that control lever (1) does not make contact with cover (2).8E7801 (4HK1-Up)
Torque for (3/8 in) locknuts (jam nuts) that hold the rod ends on the rods ... 12 4 N m (9 3 lb ft)(1) Torque for four screws ... 25 7 N m (18 5 lb ft)(2) Torque for nut ... 100 15 N m (75 11 lb ft)(3) Center line of handle must be parallel to cover plate within 5 degrees. Torque for screws to hold handle switch assembly to adapter ... 0.9 0.1 N m (8 1 lb in)