AVSPARE.COM
parts catalog

FRAME MAGNET 2I7997 - Caterpillar



2I7997 FRAME MAGNET Caterpillar parts FRAME
Rating:
16
Alternative (cross code) number:
CA2I7997
2I-7997
2I7997
Caterpillar 2I7997 FRAME MAGNET

Buy FRAME MAGNET 2I7997 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g02983376
Right side view of engine
Table 1
Specification for 331-0964 Camshaft Gp
Item Qty Part Specification Description
1 3 119-0036 Flat Head Screw Torque to 13 3 N m (115 27 lb in).
2 1 348-2587 Camshaft Before installation of the camshaft, lubricate the cam bearings with clean engine oil.
Lubricate the camshaft lobes with a 50/50 mixture of 8T-2998 Lubricant and clean engine oil
A - - Diameter of camshaft journals is 84.85 0.02 mm (3.341 0.001 inch).
Illustration 2 g02983378
Table 2
Item Qty Part Specification Description
- - - Use the following procedure in order to determine the actual camshaft lobe lift (B):
1. Measure camshaft lobe height (C).
2. Measure the base circle (D).
3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift.
B - - Specified camshaft lobe lift for:
Inlet lobe is 9.431 mm (0.3713 inch).
Exhaust lobe is 8.515 mm (0.3352 inch).
Injector lobe is 10.908 mm (0.4294 inch).


Parts frame Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.