FRAME GP-UPPER 3157106 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-7641     Tubes     2    
4C-6486 Stands     2    Note: The following procedure requires two people.
Illustration 1 g02480501
Install track roller (9) and bolts (10) .
Illustration 2 g02480500
Tighten and clean fitting (8). Refer to Operation and Maintenance Manual for the correct procedure to tighten the track.
Start the engine.
Illustration 3 g02480496
Use the following switches to raise or lower the corresponding track assembly. (5) Switch to raise and lower the left front of the machine. (6) Switch to raise and lower the right front of the machine. (7) Switch to raise and lower the rear of the machine.
Illustration 4 g01449940
While pressing switch (5) downward, lift the track assembly with a suitable lifting device.Note: The suitable lifting device should be able to support at least 1000 kg (2204 lb).
Illustration 5 g03138038
Remove the chain supporting the leg.
Lower the track assembly and the suitable lifting device simultaneously.
Illustration 6 g02480496
Use switches (5) and (6) to raise the machine off Tooling (A) .
Illustration 7 g02480497
Remove Tooling (A) .
Illustration 8 g02480476
Install work light connector (3) and the nut to the side of the machine.
Illustration 9 g03139837
Raise the rear of the machine and disengage service supports (2) .
Illustration 10 g03139836
Turn switch (1) to the OFF position.