FRAME AS 3157782 - Caterpillar

Implement Pump
Illustration 1 g03656180Implement pump is mounted to the upper right portion of the engine flywheel housing.Reference: Refer to Systems Operation, UENR4109, "Implement Pump" for additional information.Implement Controls
Reference: Refer to Operation and Maintenance Manual, SEBU9246 for additional information about the implement controls.
Illustration 2 g03827264
(1) Dozer control
(2) Ripper control Dozer control (1) and ripper control (2) are located on the right console of the operator station.Implement Control Valves
Illustration 3 g03656203The implement valve stack is mounted under the right-hand side of the operator platform.Reference: Refer to Systems Operation, UENR4109, "Control Valve (Implement)" for additional information.Pressure Reducing Valve
Illustration 4 g03656446The pressure reducing valve is located in the manifold of the pressure reducing valve.Reference: Refer to Systems Operation, UENR4109, "Control Valve (Implement)" for additional information.Main Relief Valve
Illustration 5 g03656452The main relief valve is located in inlet manifold.Reference: Refer to Systems Operation, UENR4109, "Relief Valve (Main)" for additional information.Quick-Drop Valve
Illustration 6 g03656457The quick-drop valve is installed at the center of the top of the radiator guard.Reference: Refer to Systems Operation, UENR4109, "Control Valve (Implement)" for additional information.Hydraulic Oil Tank
Illustration 7 g03656462The hydraulic oil tank is located at the rear of the right fender just in front of the fuel tank.Reference: Refer to Systems Operation, UENR4109, "Hydraulic Tank and Screen" for additional information.Vacuum Breaker/Breather
Illustration 8 g03656470The vacuum breaker/breather is located on the hydraulic tank.Reference: Refer to Systems Operation, UENR4109, "Hydraulic Tank and Screen" for additional information.Hydraulic Oil Screens
Illustration 9 g03656468The case drain oil screens are located inside the hydraulic oil tank.Reference: Refer to Systems Operation, UENR4109, "Hydraulic Tank and Screen" for additional information.Accumulator
Illustration 10 g03656484The accumulator is located on the pilot manifold.Reference: Refer to Systems Operation, UENR4109, "Accumulator (Pilot)" for additional information.Pilot Manifold
Illustration 11 g03656491The pilot manifold is located on the side of the implement Control Valve stack.Reference: Refer to Systems Operation, UENR4109, "Pressure Reducing Valve (Pilot Oil)" for additional information.