AVSPARE.COM
parts catalog

FRAME AS-HOOD 3236896 - Caterpillar



3236896 FRAME AS-HOOD Caterpillar parts 904H FRAME
Rating:
48
Alternative (cross code) number:
CA3236896
323-6896
3236896
Caterpillar 3236896 FRAME AS-HOOD

Buy FRAME AS-HOOD 3236896 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3236896:

COMPACT WHEEL LOADER  904H   Caterpillar
Number on catalog scheme: 11
 
  For full view, you need register

Information:


Care must be taken to ensure that fluids are contained during performance of inspection, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1. Operate the machine in order to warm the hydraulic oil.2. Park the machine on level ground. Lower the bucket to the ground and apply slight downward pressure. Engage the parking brake and stop the engine.
Never start the engine in order to purge the system of oil or any other reason while the hydraulic tank is being drained. Excessive wear and damage to the hydraulic components can occur.
3. The hydraulic tank is located on the right side of the machine. Press the button on the breaker relief valve in order to relieve any pressure. 4. Remove the hydraulic tank filler tank and the filler strainer. Wash the filler cap and the strainer in a clean, nonflammable solvent. Install the strainer. 5. Remove the drain plug from the bottom of the hydraulic oil tank. Wash the drain plug in a clean, nonflammable solvent.6. Open the drain valve. Allow the oil to drain into a suitable container. If the hydraulic tank is equipped with an ecology drain valve, attach a hose to a 126-7914 Oil Drain Coupling. Install the threaded end of the coupling into the drain valve in order to unseat the internal drain valve.7. Close the drain valve. Install the drain plug.8. Change the hydraulic system filter.Reference: For additional information on changing the hydraulic system filter, refer to the Service Manual module, Operation and Maintenance Manual, "Hydraulic System Oil Filter - Replace" for the machine that is being serviced. 9. Fill the hydraulic tank with clean oil. Make sure that the oil level is at the "Full" mark on the sight gauge.Reference: For additional information on the correct type of oil and the correct amount of oil, refer to the Service Manual module, Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the machine that is being serviced.10. Start the engine and run the engine at low idle for 10 to 15 seconds. After 10 to 15 seconds stop the engine.11. Add hydraulic oil to the hydraulic oil tank until the level is at the "Full" mark on the sight gauge. Install the hydraulic tank cap.12. Start the engine and run the engine at low idle. Cycle the implements so that all of the hydraulic systems are filled with oil. If the alert indicator for a low oil level comes on, stop the engine immediately. If the fill process is followed correctly, the alert indicator for a low oil level should never come on.13. Add oil to the hydraulic tank until the level is at the "Full" mark on the sight gauge. Install the hydraulic tank

Caterpillar parts catalog:

Caterpillar parts catalog
904H Wheel Loader H4T00001-UP (MACHINE) POWERED BY S4Q2T Engine


Parts frame Caterpillar catalog:

3405991 FRAME AS
623H, 623K, 623K LRC
3417335 FRAME AS
621H, 621K, 627H, 627K, 627K LRC
3332788 FRAME AS
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.