3276601 FRAME AS Caterpillar parts
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 315C, 315D L, 319D L, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 322C, 323D L, 324D, 324D L, 325C, 325D L, 326D L, 329D, 329D L, 330C L, 330D ...
Rating:
Alternative (cross code) number:
CA3276601
327-6601
3276601
CA3276601
327-6601
3276601
Weight: 62 pounds 28 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compatible equipment models: 3276601:
Number on catalog scheme:
11
For full view, you need register
Information:
Start By:a. remove rear wheelsb. remove axles1. Drain the oil from the tandem housing. 2. Remove bolts (1) and cover (2) from the top of the tandem housing. Remove bolts (3) and cover (4) from each side of the tandem housing.3. Turn the wheel spindle until the master link of the chain is at the openings. 4. Remove cotter pins (5) from the master link. 5. Install tooling (A) on the master link as shown.6. Remove master link bar (6).7. Remove the master link and tooling (A). 8. Turn the wheel spindle counterclockwise while pulling drive chain (7) out of the tandem housing. Weight of the drive chain is 23 kg (50 lb.).9. Do Steps 1 through 8 for the other drive chains.Install Drive Chains
1. Put the drive chain in position on the drive sprocket and the wheel spindle sprocket with the ends of the chain at the openings.2. Install tooling (B) on the chain. Put the master link in position in the ends of the chain. Install the master link so the end where the cotter pins are installed is toward the other chain. Make sure the master links of the two chains are not side by side on the same tooth of the drive sprockets or they can hit each other. A bar (1) can be used to keep the wheel spindle from turning.3. Install tooling (A) on the chain.4. Remove tooling (B). 5. Install the link bar (2) on the master link. Remove tooling (A).6. Install the cotter pins in the master link. 7. Put cover (3) and the gasket in position on the tandem housing. Install the bolts and the washers that hold the cover.8. Put covers (4) and the gaskets in position on each side of the tandem housing. Install the bolts and the washers that hold the covers.End By:a. install rear wheelsb. install axles
1. Put the drive chain in position on the drive sprocket and the wheel spindle sprocket with the ends of the chain at the openings.2. Install tooling (B) on the chain. Put the master link in position in the ends of the chain. Install the master link so the end where the cotter pins are installed is toward the other chain. Make sure the master links of the two chains are not side by side on the same tooth of the drive sprockets or they can hit each other. A bar (1) can be used to keep the wheel spindle from turning.3. Install tooling (A) on the chain.4. Remove tooling (B). 5. Install the link bar (2) on the master link. Remove tooling (A).6. Install the cotter pins in the master link. 7. Put cover (3) and the gasket in position on the tandem housing. Install the bolts and the washers that hold the cover.8. Put covers (4) and the gaskets in position on each side of the tandem housing. Install the bolts and the washers that hold the covers.End By:a. install rear wheelsb. install axles
Cat SIS web machinery list:
Parts frame Caterpillar catalog:
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14H NA, 160H, 160H ES, ...
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 2290, 235, 235D, 2390, 2391, 245, 2491...
3446886
FRAME AS-TRACK ROLLER
345D L, 345D L VG, 349D L
345D L, 345D L VG, 349D L
3446887
FRAME AS-TRACK ROLLER
345D L, 345D L VG, 349D L
345D L, 345D L VG, 349D L
4203853
FRAME AS-CARBODY
345D L, 349D L
345D L, 349D L
3764586
FRAME AS-UPPER
345D L, 349D, 349D L
345D L, 349D, 349D L
3529646
FRAME AS-UPPER
336D, 336D L
336D, 336D L
3446892
FRAME AS-TRACK ROLLER
345D L, 349D, 349D L
345D L, 349D, 349D L
3446893
FRAME AS-TRACK ROLLER
345D L, 349D, 349D L
345D L, 349D, 349D L
3325118
FRAME AS-CARBODY
349D L, 349E, 349E L, 349E L VG
349D L, 349E, 349E L, 349E L VG
3764590
FRAME AS-UPPER
349D, 349D L
349D, 349D L
4330043
FRAME AS-UPPER
336D2, 336D2 L
336D2, 336D2 L
1961599
FRAME AS
307C, 307D, 311C, 311D LRR, 312C L, 312D, 315C, 315D L, 318C, 320C, 320D, 320D LRR, 320D RR, 322C, 323D L, 324D, 325C, 325D L, 330D L, 345C, 345D, 345D L
307C, 307D, 311C, 311D LRR, 312C L, 312D, 315C, 315D L, 318C, 320C, 320D, 320D LRR, 320D RR, 322C, 323D L, 324D, 325C, 325D L, 330D L, 345C, 345D, 345D L
3031448
FRAME
305.5, 307C, 308C
305.5, 307C, 308C
3030290
FRAME
307C, 308C
307C, 308C
1968142
FRAME AS
312C, 312C L
312C, 312C L
1516793
FRAME AS
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
1858201
FRAME AS
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 315C, 315D L, 318C, 319D L, 320C, 320D, 320D LRR, 322C, 324D, 324D L, 325C, 325D L, 325D MH, 329D L, 330C L, 330C MH, 330D L, 330D MH, 336D, 336D L,...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 315C, 315D L, 318C, 319D L, 320C, 320D, 320D LRR, 322C, 324D, 324D L, 325C, 325D L, 325D MH, 329D L, 330C L, 330C MH, 330D L, 330D MH, 336D, 336D L,...
1516778
FRAME AS
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
2105769
FRAME AS
307C
307C
1677055
FRAME AS
307C, 307D, 311D LRR, 311F LRR, 312C L, 312D, 315C, 315D L, 320C, 320D, 320D LRR, 320D RR, 322C, 323D L, 324D, 325C, 325D L, 329D L, 330D L, 336D, 345C, 345D, 345D L, 349D, 349D L
307C, 307D, 311D LRR, 311F LRR, 312C L, 312D, 315C, 315D L, 320C, 320D, 320D LRR, 320D RR, 322C, 323D L, 324D, 325C, 325D L, 329D L, 330D L, 336D, 345C, 345D, 345D L, 349D, 349D L