FRAME AS-UNDERCARRIAGE 3415018 - Caterpillar

3415018 FRAME AS-UNDERCARRIAGE Caterpillar parts 320E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3415018
341-5018
3415018

Caterpillar 3415018 FRAME AS-UNDERCARRIAGE

Buy FRAME AS-UNDERCARRIAGE 3415018 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3415018:

EXCAVATOR 320E Caterpillar

Number on catalog scheme:

Caterpillar 3415018 Parts scheme FRAME AS-UNDERCARRIAGE

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-8733 Jack Stand 2 Start By:
Separate the track.
Illustration 1 g00545595Note: You will adjust the height of Tooling (A) for sufficient clearance to remove the track adjuster.
Raise the side of the machine. Install Tooling (A) under the frame.
Remove the track roller that is located under the track adjuster. Refer to Disassembly and Assembly, "Track Roller - Remove and Install".
Illustration 2 g00548977
Use a suitable pry bar to move the front idler and recoil spring assembly forward approximately 152 mm (6.0 inch) in the undercarriage frame.
Illustration 3 g00881290Note: The front track carrier roller has been removed to provide a better illustration of bolts (1). Bolts (1) secure the track adjuster to the vertical bulkhead in the undercarriage frame.
Access bolts (1) through the opening in the undercarriage frame below the track carrier roller. Loosen bolts (1). Do not remove bolts (1) that secure the hydraulic track adjuster to the undercarriage frame.
Illustration 4 g00881291
Carefully support track adjuster (2) before you remove track adjuster (2). The weight of track adjuster (2) is approximately 10 kg (22 lb). Remove bolts (1) and remove track adjuster (2).