FRAME GP-UNDERCARRIAGE 3582152 - Caterpillar

Removal Procedure
Start By:
Remove the valve mechanism cover.
Illustration 1 g03394128
Remove brackets (1). Disconnect wiring harness assembly (2). Disconnect hose assembly (3) and tube assembly (4).
Illustration 2 g03394129
Disconnect wiring harness assemblies (5). Remove bolts (6).
Illustration 3 g03394130
Remove bolts (7). There are 15 bolts in total.
Disconnect six harness assemblies (8).
Disconnect three harness assemblies (10) and disconnect six harness assemblies (9).
Remove the valve mechanism cover base.
Illustration 4 g03394217
Remove bolts (11) and remove harness assembly (12).
Remove seal (13) from valve mechanism cover base (14). Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Install valve mechanism cover base (14) in the reverse order.
Illustration 5 g01866736
Tightening sequence
Tighten bolts (7) to a torque of 25 6 N m (18 4 lb ft) in the numerical sequence that is shown in Illustration 3.