FRAME GP-LOADER 3727763 - Caterpillar

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g03326638
Typical example
Disconnect the inlet fuel hose (2) to the primary fuel filter (1).
Place end of hose (2) into a suitable container.
Turn the keyswitch to the START position. The fuel transfer pump (3) will begin to pump fuel. There will be the sound of the fuel transfer pump operating.
Record the time taken to fill the container with 400 mL (13.6 oz) of fuel. The minimum limit is 400 mL/min (13.6 oz/min).