FRAME AS 3843532 - Caterpillar

Illustration 1 g00828982
Connections for the engine control are located on the lower left side of the MX100. See Illustration 1. Make all other necessary connections for control to the terminal blocks on the control panel per the schematics. See Schematic, RENR5853.Note: All control wires (12 to 18 AWG) must be torqued to 2.15 N m (19 lb in).The terminal for the connection to the output contacts for the EMERGENCY position is provided. The output contacts for the NORMAL position is also provided. These terminals are marked and the terminals appear on the side of the panel. On 400 amp metal frame units, the terminals appear on the bracket above the operator handle.